7
GasLab Q2 displays and operating the device
Page 64 of
135
G a s Q u a l i t y A n a l y z e r
GasLab Q2
The
Audit trail
is a Protocol archive. It is located in the Basic System and thus
existing in all Elster device types. In the left drop-down list, it is possible to select
between
general
and
fiscal
audit trail. General audit trail and fiscal Audit trail
differ in the type of archived data.
In
general audit trail
, the change log events
recorded can be displayed more clearly with a
filter in the right drop-down list. There is a choice
between:
“
All
“ (Filter not used)
“
System
“
“
Parameter change
“
“
User log
“
Figure 7.26: Display General audit trail Overview
In the
fiscal audit trail
, parameters that can be
changed even if the security switch (SSW) is
closed are recorded if the device is used for
billing purposes. The actions will only be recorded
in such cases (closed SSW); in other cases the
archive is empty. This part of archive is primarily
relevant for billing purposes.
Figure 7.27: Display fiscal audit trail Overview
By activating the hyperlink behind the
entry, the corresponding display can be
viewed to see audit trail entry in detail.
See the example on the right hand side.
Details of the change are e.g. Date and
time, old value / new value, logged-in user
or part that has executed the change.
The contents will be displayed in the
current device language.
The nature and
scope of the displayed data depends on the
situation and the settings in enSuite. See also
chapter 8 and enSuite online help.
Figure 7.28: Example audit trail details
More information about logboogs
See chapter 7.3.7
