GasLab Q2 displays and operating the device
7
GasLab Q2
G a s Q u a l i t y A n a l y z e r
Page 55 of 135
Software status
This display shows the identification data of all software components that are included in the
device. These credentials consist of the name of the respective software components, the
version number and checksum. Behind "
Last check
" the top line shows the time of the reading
for the following information. The first column lists the name of the software components of the
system. These names are selectable hyperlinks and branch to further sub-display (component
pages) with information about this piece of software.
The second column shows the software version number of the component and the associated
checksum is listed in the third column. During operation, the actual checksums are calculated
and compared with the corresponding reference values. If a checksum is marked in red, the
last check has failed, i.e. a deviation was found. An error is generated in this case see also
chapter 11.2.
Figure 7.10: Display Info Software status
Examples for component pages.
You will find information about: Last check/ SW part/ Name/ Version/ Total code/ Param.total
Figure 7.11: Displays and Sub-Displays Info Software info
Figure 7.11 only shows examples. If you operate the device e.g. non fiscal,
you will not see the screen “Secured parameters“.As the example shows,
the component pages are not uniformly structured.
