GasLab Q2 displays and operating the device
7
GasLab Q2
G a s Q u a l i t y A n a l y z e r
Page 77 of 135
2. Changes with the help of an expanded keypad to enter letters and numbers.
An entry field you recognize on the white background
. In the example “
User name
” and
“
Password
” have a entry field. The view changes after activation and shows a
correspondending inserted keypad.
Figure 7.55: Keypad shown
Depending on the expected input a keypad with letters and numbers (left in example) is
displayed, or only a number pad will appear (right in example). A switch between uppercase
and lowercase letters as well as numbers is done by using the "
Aa
" or "
123
" field, see left
example.
The overlay keys now make it possible to select to a key (button) in the field. The selection
made is gray and you have the following options:
Apply the selected value with
the keypad is still open in this case. You can enter another
value in this field. If all values in the field already exist, you can close the keypad with
and
keep all the values in the entry field. With
, you can discard the entries. The keypad closes
also.
When you leave the input mode, a check for consistency is affected if a value
was entered that is not useful or not allowed in the present context, the value
is not accepted and the previous is preserved or replaced by a substitute
value.
Tip:
If only individual characters should be replaced, you can jump with the
button
at the end of the present entry and supplement this from now.
At the same time, the button will change too and show the following symbol
Individual characters can now be deleted from the right hand side.
If the input requires rebooting a notification with link will appear. The reboot
is immediately executed after activation of the link. If you log out without
rebooting, the changes are not accepted.
Example: Changing of IP-Adress
