GasLab Q2 displays and operating the device
7
GasLab Q2
G a s Q u a l i t y A n a l y z e r
Page 85 of 135
Procedural steps for update date and time
1.
Login and open the display
“
Date & Time
” (System >Time Service > Date & Time).
2.
Set the current date and time using the overlay keys and drop-down list.
3.
Activate if possible the “Daylight saving” field. This is only possible if enSuite in the appropriate
setting is configured. Then select between
Active
The system time of Q2 device is in the daylight saving time.
Inactive
The system time of the Q2 device is in normal time.
Automatic switching between summer time and normal time is not used in the factory settings.
For information on setting the time with enSuite see chapter 8.
4.
If the entries are entered and correct, select/ activate
Update date and time
. After activation a
status message is briefly displayed at the bottom of the screen and the new time setting is used.
A red font color indicates that the update failed.
If the NTP time synchronization is enabled (deviating from the factory setting) you have the
additional display "
Time Service NTP overview
", see following figure.
(for more information
see chapter 8 and
online help
of enSuite)
Select here "
Update
now
" to see the
current values of the
time information of
the configured NTP-
Server regardless of
the specified time
intervals.
