GasLab Q2 displays and operating the device
7
GasLab Q2
G a s Q u a l i t y A n a l y z e r
Page 63 of 135
In addition, the logged in user can change his password. The display also provides information
whether a
Remote operation panel
is active. Only one user can be logged on to a device at a
time. Either the
Users Main display
shows the
Login
action or the
User
(name SU3 in the right
example above) that is already logged in on the device is displayed. This case occurs e.g. during
the transfer of a parameterization to the device.
More information
See chapter 7.3.5
The
Logbook
(Error List Logbook see figure below) shows stored
Incidents
.
Whenever an event becomes active or ends, its state change is recorded in the
logbook.
The logbook can contain up to 10000 records; if the logbook is full, the
next entry overwrites the oldest record.
Filter selection (same as in the
"Error List Main Display")
Area for displaying errors
(scrollable if more than 2 entries are
contained in the logbook)
Sequence number of logbook
entry
Figure 7.25: Display Error List Logbook
Each event is represented individually and numbered on the right side. The small arrow in front
of the date indicates the beginning of the event (top to bottom) or end of the event (top up). See
following table.
Identification
Definition
Signal / Message is
coming
Signal / Message is
going
< black font color>
Signal / Message type
event
<yellow font color>
Signal / Message type
warning
<red font color>
Signal / Message type
alarm
