Sony Ericsson FOMA SO905iCS, Manual

Page: 277 / 534

275
GPS Function
2
Select [Loc. service client] → a party to
be notified and press .
○○サービス
Ｎｏｔｉｆｙｉｎｇ ｌｏｃａｔｉｏｎ
Ａｃｃｕｒａｃｙ： ★ ☆ ☆
“ ” flashes and the incoming
indicator flashes.
When the current location
i s n o t i f i e d , t h e l o c a t i o n
n o t i c e t o n e s o u n d s a n d
the location information is
notified to a recipient.
To enter a party to be notified and notify location
information
Select [Direct input], enter the service client ID,
and press
(OK).
To quit the Location notice
Press (Cancel), , or .
● When 2in1 is used, the location information is
notified by Number A, regardless of the 2in1
mode.
● The location information may be sent depending
on the timing of cancellation.
● Even if the location information may have been
sent, the service provider that supports the
Location notice function may not have received it
depending on the radio wave condition.
Saving a Party to Be Notified
You can save a party to be notified of your
current location information as a location
service client. Up to five parties can be saved.

Make sure to enter [Loc. serv. client] and [Service
client ID].
1
From the Menu, select [LifeKit] → [GPS]
→ [GPS settings] → [Reg. service client]
and press .
Ｌｏｃ． ｓｅｒｖｉｃｅ ｃｌｉｅｎｔ
To display the details of a party
Move the cursor to the party and press
(Detail).
To edit the information of a party
Move the cursor to the party and from the
Function menu, select [Edit]. Edit each item.
To delete a party
Move the cursor to the party and from the
Function menu, select [Delete]
→ [Delete one]
→ [Yes]. To delete all parties, from the Function
menu, select [Delete] → [Delete all], enter the
Security code, and select [Yes].
To save a party in the Phonebook
Move the cursor to the party and from the
Function menu, select [Add to phonebook]
→
[Main memory]/ [UIM].
 Follow the same steps as in the Add to FOMA
terminal phonebook (P.95, step 3 to 6) or in
the Add to UIM phonebook (P.98, step 3 to 4).
2
Press (Create).
Ｒｅｇ． ｓｅｒｖｉｃｅ ｃｌｉｅｎｔ
Ｌｏｃ． ｓｅｒｖ． ｃｌｉｅｎｔ
Ｓｅｒｖｉｃｅ ｃｌｉｅｎｔ ＩＤ
Ｐｈｏｎｅ ｎｕｍｂｅｒ
Ａｕｔｏ Ｎｏｔｉｃｅ ｓｅｔｔｉｎｇ
Ｃｏｎｆｉｒｍ
[Loc. serv. client]:
Enter a name of the party to be notified.
[Service client ID]:
Enter a notified party ID specified by the service
provider.
[Phone number]:
Enter a phone number.
[Auto Notice setting]:
Set whether to notify your current location
a u t o m a t i c a l l y w h e n y o u p l a c e a v o i c e /
videophone call to the number set at [Phone
number].
3
Enter a name of a party to be notified at
[Loc. serv. client].
Enter the name within 16 full-width or 32 half-width
characters.
4
Enter a notified party ID specified by the
service provider at [Service client ID].
Enter the ID within 12 half-width numeric characters
including “
＊
” or “#”.
Continued