Sony Ericsson FOMA SO905iCS, Manual

Page: 378 / 534

376
Other Con
v
enient Functions
Setting Which Mic to Use
<Headset microphone>
You can set to use a microphone during a call
when the Flat-plug Earphone/Microphone with
Switch (optional), etc. is connected.
1
From the Menu, select [Settings] →
[Call] → [Headset setting] → [Headset
microphone] and press .
[Valid main]:
Use the earpiece (microphone) of the FOMA
terminal.
[Valid Headset]:
Use the Flat-plug Earphone/Microphone with
Switch (optional).
2
Select a microphone to be used and
press
.
The Headset microphone is set.
Setting the JOG
<Jog setting>
You can set whether to make the JOG available
for operations, the Scroll setting, and the
functions to be activated when scrolling it in
the stand-by display.
1
From the Menu, select [Settings] →
[Management] → [Jog setting] and press
.
Ｊｏｇ ｓｅｔｔｉｎｇ
Ｒｏｔａｔｅ ｓｅｔ ＯＮ
＜Ｓｃｒｏｌｌ ｓｅｔｔｉｎｇ＞
Ｍａｉｌ ｖｉｅｗ Ｍｅｄｉｕｍ
ｉ−ｍｏｄｅ Ｍｅｄｉｕｍ
Ｆｕｌｌ Ｂｒｏｗｓｅｒ Ｍｅｄｉｕｍ
＜Ｓｔａｎｄ−ｂｙ ｄｉｓｐｌａｙ＞
Ｕｐｗａｒｄ ｒｏｔａｔｉｏｎ
Ｄａｔａ ＢＯＸ
Ｄｏｗｎｗａｒｄ ｒｏｔａｔｉｏｎ
Ｐｈｏｎｅｂｏｏｋ
2
Select [ON]/[OFF] of whether to perform
the JOG operations at [Rotate set].
3
Select [Large]/[Medium]/[Small] of the
scrolling amount when displaying mail at
[Mail view].
4
Select [Large]/[Medium]/[Small] of the
scrolling amount when displaying a site
at [i-mode].
5
Select [Large]/[Medium]/[Small] of the
scrolling amount when displaying Full
Browser at [Full Browser].
6
Select a function to be activated when
the JOG is rolled upward in the stand-by
display at [Upward rotation].
7
Select a function to be activated when the
JOG is rolled downward in the stand-by
display at [Downward rotation].
Resetting to the Default
Settings
<Reset settings>
You can reset the settings of each function to
the default settings. For the functions that are
reset by the Reset settings and the default
settings of these functions, see the list of reset
items (P.378) and the list of menus (P.420).
1
From the Menu, select [Settings]
→
[ M a n a g e m e n t ] → [ R e s e t ] → [ R e s e t
settings] and press .
The Security code screen appears.
 The Reset display also appears by pressing
for over a second in the stand-by display. Select
[Reset settings] and press
.
2
Enter the Security code and press
(OK).
The screen for confirming whether to reset all
settings appears.
3
Select [Yes] and press .
The settings are reset.