Sony Ericsson FOMA SO905iCS, Manual

Page: 273 / 534

271
GPS Function
When the settings for using each service is set to “ 毎回
確認
” (Check every time)
イマドコサーチ
０９０ＸＸＸＸＸＸＸＸ
ドコモ一郎
Ｐｒｏｖｉｄｉｎｇ ｌｏｃａｔｉｏｎ
Ａｃｃｕｒａｃｙ： ★ ☆ ☆
Ｌｏｃ．Ｒｅｑ．ｆｒｏｍ:
イマドコサーチ
ドコモ一郎
Ｓｅｎｄ Ｌｏｃ．
Ｎｏｔ Ｓｅｎｄ Ｌｏｃ．
Select [Send Loc.].
“ ” f l a s h e s , t h e L o c .
provide/check tone sounds,
and the incoming indicator
flashes.
To quit the Location provision
Press (Cancel), ,
or .
When the Lock key is set,
(Cancel) becomes
invalid.
● If there is a request for your location information
when the Public mode (Drive mode) is set, the
FOMA terminal operates as follows.
- When the settings for using each service
is set to “ 許可 ” (accept), it is indicated only
in the display and the location information
is provided. The Loc. provide/accept tone,
vibrator, and incoming indicator do not
operate.
- When the settings for using each service is set
to “ 毎回確認 ” (Check every time), the location
information is not provided.
● When the location information is requested from
a person who uses “imadocokantan search”, the
FOMA terminal operates as follows.
- The confirmation screen appears every time
you are requested. If you select [Send Loc.],
the rough positioning result is immediately
notified to the person who requests it. After
you select [Send Loc.], the GPS positioning
display appears. The high-detailed positioning
result is notified after the GPS positioning.
- After you select [Send Loc.] and you cancel
providing the location, the rough positioning
result is notified to the person who requests it.
In this case, the Location history is saved but
location information is not displayed.
● The location information may be sent depending
on the timing of cancellation.
● Even if the location infor mation may have
been sent, the service provider that supports
the Location provision function may not have
received it depending on the radio wave
condition.
● When 2in1 is used, the location information is
provided, regardless of the 2in1 mode.
● Some Service client IDs may not be displayed.
Setting Whether to Provide Your
Location Information
You can set whether to accept or reject the
request to provide your current location
information.
1
From the Menu, select [LifeKit] → [GPS]
→ [GPS settings] → [Loc. request menu]
→ [Location request] and press .
The Security code screen appears.
2
Enter the Security code and press .
The Location request display appears.
[ON]:
Provide the location information to requesting
party. The location information may be sent to a
searcher without operating the FOMA terminal.
[OFF]:
Do not provide location information to requesting
party.
[Permission schedule]:
Provide the location information to requesting
party during the permitted period.
3
Select a way to provide the location
information and press
.
The Location request is set. If you set [ON] or
[Permission sche], “
” appears.
When you select [Permission schedule]
Set a period to permit for providing location
information. Enter the time both at [Start time]
and [End time] in 24-hour format and select the
repeat type at [Repeat]. If you set [Eyd] or [Day],
enter dates both at [Start day] and [End day].
To perform the setting via the Initial setting
F r o m t h e M e n u , s e l e c t [ S e t t i n g s ]
→
[Management] → [Initial setting] → [Location
request], enter the Security code, and select
[Yes]/[No].
Continued