Sony Ericsson FOMA SO905iCS, Manual

Page: 84 / 534

PushT
alk
82
Originating a PushTalk Call

You cannot originate a PushTalk call during a voice call, a videophone call, or data
communication, or while the B mode is set in 2in1.
 If you originate a PushTalk call during i-mode communication, the i-mode communication is
terminated. Originating a PushTalk call while running i- α ppli also stops the i- α ppli.

Number B of 2in1 cannot be used for PushTalk and PushTalkPlus services.
1
Enter a phone number in the stand-by display.
2
Press .
Ｍｙｓｅｌｆ
０９０ＸＸＸＸＸＸＸＸ Ｃｏｎｎｅｃｔｅｄ
Ｏｎ ＰｕｓｈＴａｌｋ
０９０ＸＸＸＸＸＸＸＸ
Ｄｉａｌｉｎｇ ＰｕｓｈＴａｌｋ
When you originate a PushTalk call, it is switched to the hands-free
operation that allows you to hear the signal tone from the speaker.
To speak
Press while the floor is open. You can speak while you press and
hold .
3
Press to end the communication.
● You cannot use PushTalk to place a call to emergency numbers (110, 119, and 118).
● You cannot set whether to notify the caller ID when you originate a PushTalk call even if you
add “186/184”.
● The setting whether to originate a PushTalk call with/without the caller ID follows the setting
of the Set Notification (P.45).
● When you set the Set Notification to [Notify], all members including added members are
notified the phone numbers of the person who originates and all members. When you set
it to [Not notify], [User Unset] is displayed in the fields of the speaker and all members
including added members.
● If you set [Call with ID]/[Call without ID] of the caller ID at the Option call display when you
originate a PushTalk call, the phone numbers of yours and all members are/are not notified
to all members based on the selected call condition.
● When you originate a PushTalk call, if the Set Notification is set as well as the Call condition
is set at the Option call display, the following priority is applied.
1. Call condition selected at the Option call display when originating a PushTalk call
2. Set Notification