Sony Ericsson FOMA SO905iCS, Manual

Page: 166 / 534

Camer
a
164
Decorating Images Fashionably Using the Deco-Snap Mode
Using frames and stamps, you can decorate images in fashionable way.

For Out-camera recording, you can select an image size of [QCIF(144 × 176)], [QVGA(240 ×
320)], [VGA(480 × 640)], and [Stby(480 × 864)]. For In-camera recording, you can select the
image size of [QCIF(144 × 176)] and [QVGA(240 × 320)].
 When the Shoot mode is set to [Deco-Snap], the following items are changed temporarily.
The items other than Select size, Switch camera, EV(Whitening mode), and Flash cannot be
changed.
Item Setting Item Setting
Select size QVGA(240 × 320) Switch camera In camera
Select scene AUTO EV Whitening mode [OFF] : ±0.0EV
Face detection ON ※ 1 Set attach loc. info OFF
Auto Focus Macro OFF ※ 1 Multi focus Spot AF ※ 1
Auto timer
※
2 5sec Photo light OFF
Flash OFF Grid Line OFF
White balance AUTO Photometry Average
Picture effect OFF Auto save OFF
Image quality Fine Digital Zooming OFF
Image stabilize AUTO Auto orientation OFF
※ 1 The listed settings for the Face detection, Auto Focus, and Multi focus are those assumed for
use of the Out-camera. These functions do not operate when recording with the In-camera.
※ 2 The previous setting of the Auto timer is not restored even if the Shoot mode is changed.
 Once you set the Shoot mode to [Deco-Snap], the zoom magnification is set default to [ × 1.0]
even if the Shoot mode is changed to other setting.
1
Press (Func) in the Camera mode display, select [ ] (Shoot mode) →
[ ] (Deco-Snap), and press .
Ｓｅｌｅｃｔ ｓｉｚｅ
Ｓｔｂｙ（４８０×８６４）
Ｐｈｏｔｏｇｒａｐｈ ｉｍａｇｅ ｔｏ
ｆｉｔ ｔｈｅ ｓｉｚｅ ｏｆ
ｓｔａｎｄ−ｂｙ ｄｉｓｐｌａｙ
The Shoot mode is set to [Deco-Snap] and “ ” appears.
When recording with the In-camera, point the camera at the
object and go to step 3.
To switch the camera
Select [ ] (Switch camera) → [ ] (Out camera)/[ ] (In
camera).
To set the Select size
Select [ ] → a size.
To record an image with a frame
Select [ ] (Frame) → [ ] (ON)/[ ] (OFF). If you select
[ON], select a frame.
To emit the flash light (Out-camera only)
Select [ ] (Flash)
→
a type of flash light.
To change the sound for Deco-Snap
Select [ ] (Deco-Snap beep) → a sound for Deco-Snap.
To set the Whitening mode
Select [ ] (Whitening mode) → [ ] (ON)/[ ] (OFF).
 When the Whitening mode is set to [ON], the EV is set to
+1.0EV for the Out-camera and +0.3EV for the In-camera.
When set to [OFF], the EV is set to ±0.0EV.