Sony Ericsson FOMA SO905iCS, Manual

Page: 366 / 534

364
Other Con
v
enient Functions
13
Press (Complete).
The schedule is saved. When the Alarm is set to
[ON], “
” appears in the stand-by display.
The schedule dates are highlighted on the calendar.
● When you set [Create/Edit] at [Schedule] of the
Edit slide setting, just opening the FOMA terminal
in the calendar or schedule list allows you to
save the schedule (P.354).
●
When the Schedule alarm and Alarm are set
simultaneously, “ ” is displayed instead of “ ”.
● If the repeat type of the schedule set for the 31st
is set to [Month], the schedule is set for the last
day of the month for months with less than 31
days. It is also applied when the repeat type of
the schedule set for the 29th of February in a
leap year is set to [Year].
● When you set an i-motion or Chaku-Uta Full
®
for
the alarm tone or set an i-motion for the alarm
image, the settings may be changed in some
cases.
At the Schedule Alarm Time
The alarm sounds for about 30 seconds with
the indicator flashing and the schedule data is
displayed.
If there are several overlapping schedules with
the same start time of the alarm, the number
of schedules you have in addition is shown as
“XXX” on the upper right of the display.
Ｓｃｈｅｄｕｌｅ
１２：００
Ｌｕｎｃｈ ｍｅｅｔｉｎｇ
To stop the alarm tone
Press any key.
When you do not stop the
alarm tone
The Schedule display
appears. To turn off the
Schedule display, press
(OK), , or .
● If you set an i-motion with video and sound
tracks to the alarm tone, a movie in the i-motion
is displayed.
● If the alarm time comes during a voice call or
PushTalk communication, the default alarm tone
sounds and default alarm image is displayed.
The vibrator does not operate.
● The Schedule alarm does not operate in the
following cases.
- When the FOMA terminal is powered off
- While the Lock all is set
- While the Personal data lock is set
- While the Omakase Lock is set
- While updating the software
● If the alarm time comes in the following cases,
the Schedule alarm may operate when the status
changes to during a call or stand-by.
- While placing/receiving a voice/videophone
call or originating/receiving a PushTalk call
- During packet communication
- During the infrared communication/while the
infrared remote control is being used
- During the iC communication
- During data communication or while reading/
writing data from/into a microSD memory card
on a PC with the FOMA terminal connected
using the USB cable
- While recording a still image/movie
- B e e p w h i l e re c e i v i n g A re a M a i l , w h i l e
sounding Area Mail ring tone, or displaying
Area Mail
● If you leave the FOMA terminal with the battery
pack removed or fully expended for a long
period of time, the date and time is reset, and the
Schedule alarm may not operate correctly.
Setting the Schedule Alarm
Operations
You can set the details of the operations of the
Schedule alarm.
1
Press (Func) in the calendar.
The Function menu appears.