Sony Ericsson FOMA SO905iCS, Manual

Page: 402 / 534

400
Netw
or
k Ser
vices
Menu
item
Operation
Set call/
receive
No. To identify the call placed or received using
Number B, set the font color and ring tone of
the incoming/receiving call display.
● Set the font color
Select [Set call/receive No.]
→
[Disp. call/rcv.
No.] → [dark]/[light].
● Set the ring tone
Select [Set call/receive No.] → [Ringtone
for Number B]
→
[Incoming call]/[Incoming
V.phone] → a r ing tone from MUSIC/
i-motion/Melody of the Data Box.
 You can set the following files.
Category File format File size Image size
MUSIC ※ AAC-LC/
HE-AAC Max. 5M
bytes
−
i-motion ※ MP4 Max. 10M
bytes Max. [VGA
(640
× 480)]
Melody SMF/
MFi Max. 350K
bytes
−
※ Some files may not be set.

If you select [ON] at [Link incoming call],
the ring tone for the Incoming V.phone
follows the setting for the Incoming call.
 When you receive a call without the caller
ID, the ring tone follows the setting of
[Ringtone for Number B].
2in1
function
OFF Quit using the 2in1 functions.
Select [2in1 function OFF] → [Yes].
Receive
avoid.
setting Set the restriction for incoming call of Number
A and Number B.
● Set the restriction for incoming call for
Number A and Number B individually
Select [Receive avoid. setting] → [Change
receive avoid.] → [Rcv. avoid. (Number
A)]/[Rcv. avoid. (Number B)] → [Receive]/
[Avoid]/[Unchange]
→
(Complete).
● Check the current setting
Select [Receive avoid. setting] → [Check
receive avoid.] → [Yes].
●
Activate/deactivate the Mode link
When the A mode is used, allow to receive
a call only for Number A. When the B mode
is used, allow to receive a call only for
Number B. When the Dual mode is used,
allow to receive a call for both Number A
and Number B.
Select [Receive avoid. setting] → [Mode link
setting]
→
[Yes].

When the Mode link setting is set to
“Activate”, you cannot change the mode
while the FOMA is outside of the service
area.
● S e t t h e R e c e i v e a v o i d . s e t t i n g f ro m
overseas
Select [Receive avoid. setting] → [Rcv.
avoid. set(Int.)]
→
Operate as instructed by
the guidance.
Selecting a Phone Number
When Placing a Call
When the Dual mode is set, you can select a
phone number to place a call.
1
Enter a phone number in the stand-by
display and press
.
To place a videophone call
Press (V.phone).
ドコモ次郎
Ｓｅｌｅｃｔ ｎｕｍｂｅｒ
ｔｏ ｃａｌｌ
Ｎｕｍｂｅｒ Ａ
Ｎｕｍｂｅｒ Ｂ
Ｃａｎｃｅｌ
2
Select [Number A]/[Number B] and press
.
Place a call from the selected phone number.
● When you place a call using the Redial/Received
record, the phone number which was used to
receive/place a call previously is displayed and
the call is placed using this phone number.