Smiths Medical Medfusion 3500 Operator'S Manual Download Page 61

Page: 61 / 152

Medfusion® Model 3500 pump V6

Operator’s Manual

WARNING:

Confirm All Settings

. Before starting

any

delivery,

always

confirm the accuracy of

all

infusion values to the original order. Programming

the pump at a delivery rate other than that

prescribed will cause inappropriate delivery, which

can result in serious injury or death.

4. When all delivery settings are confirmed

as correct, press

to begin infusion.

sure all pump settings are correct before

starting infusion

TVD and PVD/PDD Retention

: The pump also

retains TVD and PVD/PDD from the last infusion.

If these values are not wanted, they must be

manually cleared before beginning a new infusion.

Summary of Contents for Medfusion 3500

























































































































































Search results

Summary of Contents for Medfusion 3500

Reviews:

Related manuals for Medfusion 3500

Brands by name

Popular brands

Smiths Medical Medfusion 3500, Operator'S Manual

Search results

Summary of Contents for Medfusion 3500

Reviews:

Related manuals for Medfusion 3500

Brands by name

Popular brands