Smiths Medical Medfusion 3500 Operator'S Manual Download Page 144 | Manualshive

Page: 144 / 152

background image

140

Medfusion® Model 3500 pump V6

Operator’s Manual

Maintenance & service

This chapter includes information relating to both

standard maintenance and service.

WARNINGS:

• Pump Maintenance

. To avoid electric shock, only

trained biomedical service personnel may service

this pump. Service personnel should disconnect

the AC power cord before servicing the pump.

• Shock Hazard:

The only means of removing AC

power is to disconnect the AC power cord. While

the AC power cord is attached to the pump and

plugged into an AC outlet, live main voltage is

present within the pump.

• Manufacturer Recommended Maintenance:

Always maintain this pump following

manufacturer recommended instructions

in the

Technical Service Manual

. Improperly maintained

pumps may cause either under-infusion or over-

infusion to patient.

• Never Open the Pump Case:

To avoid electric

shock, users should never open the pump case

or battery compartment for any reason. Service

personnel should always disconnect the AC power

cord before servicing the pump.

• Dropped or Damaged Pumps:

Never use a

dropped or obviously damaged pump. Withdraw

it from service until a trained biomedical

technician can test it.

Periodic maintenance

Trained biomedical service personnel should test

the pump at least yearly to ensure continued safe

operation.

• This testing should be performed at least yearly,

or whenever the pump has been damaged or

dropped.

• The

occlusion

and

other sensors

must be checked

yearly.

• Refer to the

Technical Service Manual

for

specific details.

The

PharmGuard

®

Toolbox 2 User’s Manual

(provided with the PharmGuard

®

Toolbox 2 software)

provides information on customizing the settings and

features of the pump, which in turn affect the use and

operation of the pump on a daily basis.
The

Medfusion

®

Model 3000 Series Technical Service

Manual

, (catalog number G6000278) provides

technical information on this pump, including:
•  Functional Descriptions
• Calibration
•  Pump teaching, learning, cloning
•  Theory of Operation
•  Diagnosis and Testing
•  Service Parts*
Contact Smiths Medical for availability.
*Including replacement battery packs and power

cords

«
...
142
143
144
145
146
...
»

Summary of Contents for Medfusion 3500

























































































































































Reviews:

No comments

Related manuals for Medfusion 3500

Brand: vanEE Pages: 52

Brand: Caddon Hives Pages: 3

Brand: Parker Research Corp Pages: 4

Brand: Eastwood Pages: 20

Brand: Daihan Scientific Pages: 43

Brand: Gainsborough Pages: 2

Brand: Gainsborough Pages: 2

Brand: Gait up Pages: 12

Brand: Gait up Pages: 6

Brand: Gaiam Pages: 2

Brand: Hacker Pages: 2

Brand: J.P. SELECTA Pages: 8

Brand: Haemonetics Pages: 134

Brand: Hadeco Pages: 72

Brand: Hantek Pages: 124

Brand: Hameg Pages: 10

Brand: Ocean Sonics Pages: 45

Brand: Ultimate Healthcare Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands