Smiths Medical Medfusion 3500 Operator'S Manual Download Page 103

Page: 103 / 152

Medfusion® Model 3500 pump V6

Operator’s Manual

Keypad lock

The keypad can be locked during delivery. The lock

feature is provided to make the delivery settings

tamper resistant.
Once the keypad is locked, a setting cannot

be modified until the keypad is unlocked. The

Medfusion

Model 3500 pump V6 offers a

programmable unlock code option set through

custom configuration.

Any high-priority alarm

automatically unlocks the front panel.

1. Press

Lock

to lock the front panel controls.

The

Lock indicator on the front panel

lights.

2. If any front panel keys other than

Unlock

are pressed, a “

Pump is Locked

” message

appears on screen.

3. Press the

Unlock

softkey to unlock the

front panel. If an Unlock Passcode has been

set, a prompt to supply the passcode before

the front panel will unlock is displayed.

BACKSPACE

ENTER

ENTER UNLOCK PASSCODE - PRESS ENTER TO CONTINUE

HIGH: 9999
LOW: 0

CLEAR

PVD

0.025

RATE

4.5

LOCK

CHG RATE

OPTIONS

CLEAR TVD

100%

B-D

OPTIONS

CLEAR TVD

PUMP IS LOCKED

PVD

0.030

RATE

4.5

CHG RATE

UNLOCK

Summary of Contents for Medfusion 3500

























































































































































Search results

Summary of Contents for Medfusion 3500

Reviews:

Related manuals for Medfusion 3500

Brands by name

Popular brands

Smiths Medical Medfusion 3500, Operator'S Manual

Search results

Summary of Contents for Medfusion 3500

Reviews:

Related manuals for Medfusion 3500

Brands by name

Popular brands