Operation and Maintenance Manual (DTR) iSWAY
®
Set of products
Version 1.8 of 2.2021
165
5.
The operator, repairer or maintainer must be qualified and licensed according to the
regulations in force in the country where the equipment is installed.
6.
The installation location of the iSWAY-
FC®, iSWAY
-
WFC®, iSWAY
-
RFC® must be
equipped with the necessary protective equipment to ensure safe handling and the
necessary fire safety equipment as required by local regulations.
20.
Information
Cyclic inspections in accordance with the requirements of PN EN12101-6 part 6 concerning
pressure differential systems guarantee reliable and failure-free operation for many years. These
inspections are divided into weekly and monthly inspections, which are carried out by the technical
services on site, specially trained by the SMAY service or an authorised SMAY service. When
starting up the device, the technical services of the facility receive an Inspection and Maintenance
Book. In addition to the inspections mentioned above, annual inspections are also carried out by
SMAY Service or an authorised SMAY Service. In addition, service personnel are ready to take part
in plant start-ups, maintenance work and to be at your disposal at any time in case of an
emergency
.
Delivery documentation:
Together with iSWAY-FC, iSWAY-WFC, iSWAY-RFC the customer receives:
•
DTR of the iSWAY-
FC®, iSWAY
-
WFC®, iSWAY
-
RFC®
When the iSWAY unit/system is started, the customer receives:
1.
Start-up protocol
2.
Internal calibration and measurement protocol
3.
Inspection and maintenance book
21.
OWG - Guarantee General Terms and Conditions
1.
SMAY sp. z o.o
. with its registered office in Kraków at ul. Ciepłownicza 29, 31
-587
Kraków (hereinafter referred to as: “Warrantor"), NIP (Tax Number): 6782821888, REGON:
356295933, KRS: 000000007764, grants a quality warranty for sold products, materials, parts,
workmanship or assembly and undertakes to remove defects free of charge if they occur during
the warranty period under the terms and conditions specified in these General Terms and
Conditions of Warranty.
2.
The person entitled under the warranty is the purchaser - the entity which made a direct
purchase of products from the Warrantor.
3.
The warranty is valid in Poland for a period of 24 months from the date of sale by the
Warrantor, unless an agreement provides otherwise.
4.
The warranty period may be extended on terms agreed separately with the Warrantor.