Operation and Maintenance Manual (DTR) iSWAY
®
Set of products
Version 1.8 of 2.2021
42
Fig. 11.1. Diagram of possible mounting options.
After determining the mounting direction, it is recommended to remove the plugs of Ø14
drainage holes in the lower profiles of the unit housing. The arrangement of the M8 mounting
holes (Fig. 11.3), allows the iSWAY unit to be mounted in any direction according to the diagram
(Fig. 11.1). An example of installation on the roof using the BIG FOOT support system is shown in
Fig. 11.2.
Vertical installation requires the use of an additional substructure, a design dedicated to the
designer.
Fig. 11.2. Example of mounting the device on a roof using BIG FOOT installations.
Table 11.2. iSWAY-FC
®
basic dimensions.
Unit size
A
B
C
D
W2
[mm]
[mm]
[mm]
[mm]
[mm]
0
2292
1597
1270
435
770x770
1
2506
1847
1500
550
1000x1000
2
2714
2047
1700
650
1200x1200
Installation direction
Axes of flexible
connector
Air flow direction
–
intake iSWAY FC
Air flow direction
–
output iSWAY FC
