Operation and Maintenance Manual (DTR) iSWAY
®
Set of products
Version 1.8 of 2.2021
99
14.4.3.
iSFS SMAY
Fig. 14.9. View of iSFS fans.
Table 14.3. Fans used in iSWAY-
RFC® units.
Type of device
Type/Diameter
Power supply[VAC]/
Power
consumption[kW]
iSWAY-
RFC®
1.5
iSFS 56 T4
3x400/1,5
2.2
iSFS 63 T4
3x400/2,2
3.0
iSFS 80 T4
3x400/3,0
4.0
iSFS 80 T4
3x400/4,0
5.5
iSFS 100 T4
3x400/5,5
7.5
iSFS 100 T4
3x400/7,5
NOTE!
In the event of a fan motor malfunction, the "Collective fault" light on the TSS or TS panel and
the MAC-FC controller issues a fault signal to the CSP. If a fan malfunction is detected, inform
the SMAY service immediately. Do not repair or replace the fan yourself. This can only be done
by SMAY service or an authorised SMAY service.
14.5.
SzA-FCP - automation cabinet
The ShA-FCP automation cabinet supplies power for iSWAY-
FC components® and is
mounted inside this compact unit. SzA-FCP has a built-in frequency inverter with fire mode. The
cabinet has a built-in MAC-FC regulator and output circuits - among others, control of the
shutter and of the double intake system. It also provides 24VDC power, with battery backup. The
cabinet's power supply is monitored and a power confirmation signal is displayed on a light on
the front panel of the automation cabinet.
Optionally, a P-MAC or P-MACF pressure converter and additional 24VDC outputs (to
TSS, peripheral device) can be installed in the SzA-FCP automation cabinet.
Cabinets are manufactured in different types depending on the devices mounted inside
the cabinet and the power of the built-in inverter as shown in Table 14.4.
