Operation and Maintenance Manual (DTR) iSWAY
®
Set of products
Version 1.8 of 2.2021
156
•
check the power supply status of TSS or TS panels ("Board power supply" lamp), in
case of power failure check the correctness of electrical connections of panels on
the basis of an appropriate electrical design
•
check the collective fault indication ("General fault" light),
•
check the status of the power supply and the accompanying system components
based on the DTR documentation of the equipment
•
check the correctness of the pressure maintained display. During "Standby", the
displayed value should be between 0 and 5[Pa]. In case of indication of values off
the allowed range, it is necessary to start service activities, based on the device's
technical documentation, aimed at diagnosing and removing failures.
Note:
The fault diagnosis must be carried out using the ASB Manager software after connecting the
computer to the service connectors of the TSS, TS or MAC-FC device. Diagnosis can be
performed by the SMAY service or by an authorized SMAY service provider based on the
instructions of the ASB Manager.
17.
Start-up and adjustment
The purpose of start-up is to prepare the device for operation, which is understood as the state
"Standby" (no fire alarm) and "Operation" status (fire alarm or test connection).
Only the SMAY service or an authorized SMAY service, equipped with a set of specialized mounting
and measuring instruments, is authorized to start up and calibrate.
NOTE:
Start-up may only be carried out if proper installation, electrical connections are made and the
building is prepared for start-up.
NOTE:
Start-up must be carried out by at least two people.
18.
Operation and maintenance
1.
Before starting any operation and maintenance work, please read this documentation. In
particular, the persons responsible for operating the equipment/system in service and
maintenance are obliged to do so.
In the absence of trained personnel with specific technical skills, the current inspection
of the equipment should be performed by SMAY Service or an Authorized SMAY Service.
