Operation and Maintenance Manual (DTR) iSWAY
®
Set of products
Version 1.8 of 2.2021
108
NOTE!
If the Anti-Frost system is found to be malfunctioning, check the 1F4 protection position in the
SzA-FCP cabinet and inform SMAY service immediately. Do not repair or replace the devices of
the system yourself. This can only be done by SMAY service or an authorised SMAY service.
NOTE!
The LDHR005G-D infrared illuminator can ignite dry components directly on its housing.
Therefore, it is recommended to check the cleanliness of the LDHR005G-D infrared heater
periodically (instruction manual below) between the beginning and the end of October due to its
operation in winter conditions.
Instructions for checking the cleanliness of the infrared heater
Before checking the IR illuminator for cleanliness, the iSWAY-FC type must be specified:
I.
iSWAY-FC-0
II.
iSWAY-FC-1
III.
ISWAY-FC-2
After determining the type of the iSWAY air handling unit, we proceed to the corresponding point
of the instruction (I, II, III) to check the cleanliness of the infrared heater.
