SMAY iSWAY-FC Operation And Maintenance Manual Download

Page: 92 / 168

Operation and Maintenance Manual (DTR) iSWAY

Set of products

Version 1.8 of 2.2021

Fig. 14.3. iSWAY-RFC

14.1.

Shut-off damper actuator

The BF24 and BFN24 actuators (Fig. 14.4) are designed to control the shut-off damper. Both

open and close automatically. BFN24 actuator is used in iSWAY-WFC 1.1, 1.5, 2.2 and 3.0.

Fig. 14.4. Shut-off damper actuators. BF24 on the left and BFN24 on the right.

The actuator is powered by 24VDC.

During normal operation ("standby"), the damper should be closed (90° damper axis position

indication). During the fire operation of the device (aeration), the damper should

be open (0°

indication of damper axis position).

NOTE!

Summary of Contents for iSWAY-FC









































































































































































Search results

Summary of Contents for iSWAY-FC

Reviews:

Related manuals for iSWAY-FC

Brands by name

Popular brands

SMAY iSWAY-FC, Operation And Maintenance Manual

Search results

Summary of Contents for iSWAY-FC

Reviews:

Related manuals for iSWAY-FC

Brands by name

Popular brands