SMAY iSWAY-FC Operation And Maintenance Manual Download

Page: 52 / 168

Operation and Maintenance Manual (DTR) iSWAY

Set of products

Version 1.8 of 2.2021

and one horizontal profile as shown in Fig. 11.19. The iSWAY-RFC

kit includes minimum four

modules.

Fig. 11.19. BIG FOOT H module.

The BIG FOOT H profile is screwed to the rectangular duct by means of screws screwed through
the vertical profiles, two screws per profile.

Fig. 11.20. Rectangular duct with mounted BIG FOOT H supports.

The rectangular ducts and the other iSWAY-RFC

modules in the horizontal installation have

standard flange connections, by means of which the elements are connected to each other by
turning in corners. For clearance dimensions over 600 mm, use additional MKZ clamps on the
sides of the flange mounted at a spacing of ~500mm.

Vertical profile

Horizontal profile

Reinforcing rib

Foot

Rectangular channel

Hexagonal bolt, washer, nut

BIG FOOT H assembly

Summary of Contents for iSWAY-FC









































































































































































Search results

Summary of Contents for iSWAY-FC

Reviews:

Related manuals for iSWAY-FC

Brands by name

Popular brands

SMAY iSWAY-FC, Operation And Maintenance Manual

Search results

Summary of Contents for iSWAY-FC

Reviews:

Related manuals for iSWAY-FC

Brands by name

Popular brands