Operation and Maintenance Manual (DTR) iSWAY
®
Set of products
Version 1.8 of 2.2021
57
The power supply to the equipment should be guaranteed during a fire. Before connecting the
power supply, check that it has been supplied with the appropriate cable in accordance with the
guidelines given in the tables. In addition, it is required to check the voltage and frequency values
of the mains supply, which may
differ by no more than ±5% from those given in this technical and
operational documentation. Do not connect the units if there are significant inconsistencies in the
value of the network voltage and frequency.
13.1.1.
Main power connection
Fig.13.1. Left side power connection to iSWAY-FC
®
. On the right, main power supply to iSWAY-WFC
®
and iSWAY-RFC
®
connect to the SzA-FCK automation cabinet
Table 13.1. Series of main switches used in iSWAY-FC
®
.
The device
Breaker type
iSWAY-FC 0.3
4G25-92-PKS6
iSWAY-FC 0.12
4G25-92-PKS6
iSWAY-FC 1.17
4G25-92-PKS6
iSWAY-FC 1.20
4G25-92-PKS6
iSWAY-FC 1.24
P3-63
iSWAY-FC 2.31
P3-63
iSWAY-FC 2.39
P3-63
iSWAY-FC 2.47
P3-100
iSWAY-FC 2.75
P3-100
The iSWAY-FC
®
service switch may be replaced by a larger one by SMAY or an authorized SMAY
service.
iSWAY-RFC/WFC device
iSWAY-FC device
Service
switch
GUARANTEED POWER
SUPPLY
3X400V
FROM THE SUBSTATION
GUARANTEED POWER
SUPPLY
3X400V
FROM THE SUBSTATION
