SMAY iSWAY-FC Operation And Maintenance Manual Download

Page: 40 / 168

Operation and Maintenance Manual (DTR) iSWAY

Set of products

Version 1.8 of 2.2021

Fig. 10.2. Transportation by crane, attachment of slings to M16 long threaded eye bolts.

10.2.

iSWAY-WFC

The iSWAY-WFC

is delivered fully packed on a pallet: telescopic ventilation duct, Air intake and

fan. The SzA-FCK cabinet (power supply element of the iSWAY-WFC kit) is sent with iSWAY-WFC.
The product should be stored indoors, providing protection against external factors.

Fig. 10.3. Packing of iSWAY-WFC

on a pallet for the largest sizes of the assembly.

Ł type angular corners

(plastic film wrapped)

Plastic film wrapped CDH-K intake
placed into the KT
and film wrapped together

Plastic film wrapped ventilator
placed into the KT
and film wrapped together

Fasten with the use of a
tape along with a pallet

Summary of Contents for iSWAY-FC









































































































































































Search results

Summary of Contents for iSWAY-FC

Reviews:

Related manuals for iSWAY-FC

Brands by name

Popular brands

SMAY iSWAY-FC, Operation And Maintenance Manual

Search results

Summary of Contents for iSWAY-FC

Reviews:

Related manuals for iSWAY-FC

Brands by name

Popular brands