Operation and Maintenance Manual (DTR) iSWAY
®
Set of products
Version 1.8 of 2.2021
6
1.
Introduction
Thorough reading of this documentation, installation and use of the iSWAY-FC
®
, iSWAY-
WFC
®
, iSWAY-RFC
®
units in accordance with the descriptions given herein and observance of all
safety conditions are the basis for correct and safe operation of the unit.
This DTR applies to iSWAY
®
generation 2018. The iSWAY- FC
®
generation of 2012 and
2015 have a dedicated separate DTR.
It is assumed that works on the transport, installation, assembly of iSWAY-FC
®
, iSWAY-WFC
®
,
iSWAY-RFC
®
, connection of installations related to the device as well as maintenance and repairs
are carried out by qualified personnel or are supervised by authorized persons.
Qualified personnel are considered as persons who, in view of their training, their experience in
electromechanical equipment and their knowledge of the relevant standards, documentation and
regulations concerning safety and working conditions, have been authorised to carry out the
necessary maintenance work on the basis of a training protocol and are able to recognise and
avoid possible risks.
The following operation and maintenance manual contains detailed information on all possible
configurations of the air handling units, examples of their installation and commissioning, use,
repair and maintenance. If the units are operated as intended, this manual and the other
documents accompanying the units contain sufficient instructions for qualified personnel.
•
Installation, connection of associated installations, commissioning, operation and
maintenance must be carried out in accordance with the directives and regulations in force
in the country where the appliance is installed.
•
It is recommended to use the assistance of SMAY Authorised Service Centres during
assembly, installation, commissioning, repair and maintenance.
•
The documentation should always be kept close to the unit and easily accessible to service
personnel.
NOTE:
The manufacturer reserves the right to make changes in the operation and maintenance
manual.
