Operation and Maintenance Manual (DTR) iSWAY
®
Set of products
Version 1.8 of 2.2021
142
For FireBUS® , the HTKSH FE180/PH90 ekw
2x2x0.8 line is applied. The correct installation of
the shielded cable in the EMC gland of the TSS panel is shown below (Fig. 15.27).
Fig.15.27. Installation diagram of shielded cable in EMC cable duct.
NOTE!
In the event of a TSS panel malfunction or communication loss with the iSWAY-FC, the
"Collective fault" light on the panel is displayed and the MAC-FC controller issues a fault signal
to the CSP. If TSS panel malfunction is detected or communication loss, inform the SMAY service
immediately. Do not repair or replace the panel yourself. This can only be done by SMAY service
or an authorised SMAY service.
Each control and display panel should be permanently fitted with a "
User’s manual for Control
and Displa
y Panel “TSS”
".
