Operation and Maintenance Manual (DTR) iSWAY
®
Set of products
Version 1.8 of 2.2021
167
legible rating plates, if any);
c)
all periodical, maintenance and service inspections and inspections required by the
Warrantor and/or the applicable law, in particular those specified in the Operation and
Maintenance Documentation (if applicable), applicable standards, including PN-EN12101-6 (if
applicable), required by construction law (The Act of 7 July 1994 Construction law, consolidated
text, Journal of Laws of 2018 , item 1202 as amended), required by the Act of 24 August 1991
on fire protection (consolidated text Journal of Laws of 2018 , item 620 as amended), properly
documented in the Inspection and Maintenance Book and/or the object book.
d)
the products/elements of the system were properly installed, used, operated and
maintained in accordance with the technical documentation of the Warrantor, including the
Operation and Maintenance Documentation (if any).
16.
The warranty does not cover:
a)
execution of the checks and inspections required by the Warrantor and/or the
applicable law, periodical, maintenance and service inspections and inspections;
b)
claims to the technical data of the products/system components insofar as they comply
with the information in the current documentation;
c)
normal wear and tear of equipment or parts thereof;
d)
consumption of products/system components defined as operational, whose lifetime
depends on the intensity of use (e.g. circuit breakers, switches, tapes, fuses, batteries,
accumulators, etc.);
e)
loss of data stored in the memory of relevant system components;
f)
loss of control application settings due to lack of basic power supply for a period longer
than the warranty time of emergency power supply operation, after the start-up process is
completed;
g)
malfunction of third party software used in cooperation with the purchased system.
17.
The warranty does not cover damage caused by reasons attributable to the holder of
the warranty or third parties, in particular:
a)
caused by incorrect power supply voltage or electrical installation, incorrect installation
of the product/system, storage of its components or its operation in conditions and rules
inconsistent with those specified by the Warrantor in the Operating Manuals, Operation and
Maintenance Documentation;
b)
negligence in timely and qualitative performance of the appropriate inspections,
periodic checks and maintenance referred to in section 15(c) above;
c)
resulting from the use of consumables (e.g. batteries, fuses, etc.) that do not comply
with the instructions of the Warrantor in the Operation and Maintenance Documentation;
d)
mechanical and electrical damage and defects caused by them;
chemical and electrochemical damage resulting from the use of substances inconsistent with
the position material cards or from the use of a device made of improper material and defects
caused by them;
damage to the lacquer coating caused by non-observance of the "Terms and conditions of
storage and transport of lacquer products" instructions (manual available at www.smay.pl);
when repairs and interferences in the system were made by unauthorized persons and not
authorized by the Warrantor.
18.
The warranty does not cover damage caused directly or indirectly by force majeure
events such as, in particular: flood, fire, lightning, etc..
19.
In the event of unjustified claims by the person entitled under the guarantee. The
Warrantor charges a diagnostic and logistic fee according to the " Service Work Tariff ",
available at www.smay.pl. Transport costs in the event of unjustified claims shall be borne in
full by the warranty holder.
20.
In the event of the existence of any payable financial obligations of the authorized
