background image

a

BF50UQ, BF80UQ, BF80S, BF100UQ, BF100S,

BF110UQ, BF110S, BF125UQ, BF130UQ, BF135UQ

e

Ultra Quiet Bath Fan 

User s Guide

210572115 Rev. E 8-09

Item Stock Number(s): BF50UQ, BF80UQ, BF80S, BF100UQ, BF100S,

BF110S, BF110UQ, BF125UQ, BF130UQ, BF135UQ

READ AND SAVE THESE INSTRUCTIONS

READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.

PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH

INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

GENERAL SAFETY INFORMATION

When using electrical appliances, basic precautions should always be followed to reduce

the risk of fire, electric shock and injury to person, including the following:

1.

Read all instructions before installing or using exhaust fan.

2.

Use this unit only in the manner intended by the manufacturer. If you have
questions, contact the manufacturer.

3.

Before servicing or cleaning the unit, switch power off at service panel
and lock the service disconnecting means to prevent power from being
switched on accidentally. When the service disconnecting means cannot
be locked, securely fasten a prominent warning device, such as a tag, to
the service panel.

4.

Installation work and electrical wiring must be done by qualified person(s)
in accordance with all applicable codes and standards, including fire-
related construction.

SAVE THESE INSTRUCTIONS

IMPORTANT INSTRUCTIONS -

OPERATING MANUAL

5.

Sufficient air is needed for proper combustion and exhausting of gases
through the flue (chimney) of fuel burning equipment to prevent back drafting.
Follow the heating equipment manufacturer’s guideline and safety standards
such as those published by the National Fire Protection Association (NFPA)
and the American Society for Heating, Refrigeration, and Air Conditioning
Engineers (ASHRAE), and the local code authorities.

CAUTION

FOR GENERAL VENTILATING USE ONLY. DO NOT USE

TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS AND VAPORS.

6.

When cutting or drilling into wall or ceiling, do not damage electrical
wiring and other hidden utilities.

7.

Ducted fans must always be vented to the outdoors.

1 of 4

www.geelectrical.com

Summary of Contents for BF50UQ

Page 1: ...rvice panel and lock the service disconnecting means to prevent power from being switched on accidentally When the service disconnecting means cannot be locked securely fasten a prominent warning device such as a tag to the service panel 4 Installation work and electrical wiring must be done by qualified person s in accordance with all applicable codes and standards including fire related construc...

Page 2: ... Line up housing so that it will be flush with the finished ceiling Secure the ends of the rails with screws or nails not included to the joists and slide the housing into the final position Figure 2 SECTION 3 Existing Construction 1 Set housing in position between the joist and trace an outline onto the ceiling material Figure 3 Set housing aside and cut opening being careful not to cut or damage...

Page 3: ...is cord will only fit one way into the receptacle Figure 9 3 Install the grill by squeezing the two ends of the springs together and installing them up into the slots on the fan s housing Push the grill up into position Figure 10 4 Restore power and test your installation SECTION 7 Use and Care CAUTION MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE SERVICING THE UNIT 1 Cleaning the Grill ...

Page 4: ...r than the intended purpose of manufacturer or used commercially Damage to the product caused by accident fire floods acts of customer or acts of God This warranty contains the sole and exclusive warranty of GE for claims based on defects in these products Upon the expiration of the warranty period all such liability shall terminate There are no other warranties whether written oral implied or sta...

Reviews: