![background image](http://html.mh-extra.com/html/ge/gfa28dsvn/gfa28dsvn_installation-instructions-manual_126812001.webp)
If you have any questions, call GE Appliances at 800.GE.CARES
(800.432.2737)
or
visit our Website at:
GEAppliances.com
In Canada, call 800.561.3344
or
visit
www.GEAppliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•
IMPORTANT
–
Save these instructions for
local inspector’s use.
•
IMPORTANT
–
Observe all governing
codes and ordinances.
•
Note to Installer
–
Be sure to leave these
instructions with the Consumer.
•
Note to Consumer
–
Keep these instructions for
future reference.
• This dryer must be exhausted to the outdoors.
• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not
covered under the Warranty.
• Remove and discard existing plastic or metal foil
duct.
- Risk of Fire
• Clothes dryer installation must be performed by a
qualified installer.
• Install the clothes dryer according to these
instructions and local codes.
•
DO NOT
install a clothes dryer with flexible plastic
venting materials. If flexible metal (semi-rigid or
foil-type) duct is installed, it must be UL-listed and
installed in accordance with the instructions found
in “Connecting the Dryer to House Vent” later in
this manual. Flexible venting materials are known
to collapse, be easily crushed and trap lint. These
conditions will obstruct dryer airflow and increase
the risk of fire.
• To reduce the risk of severe injury or death, follow
all installation instructions.
• Save these instructions. (Installers: Be sure to
leave these instructions with the customer.)
WARNING
Dryer Venting Kit
WE16X29317 / GFA28DSVN
Installation
Instructions
02-20 GEA
31-3000209
Rev 1
TOOLS AND MATERIALS YOU WILL
NEED TO INSTALL EXHAUST DUCT
Ŷ
Ŷ
1/4" Socket & Nut Driver
Ŷ
Ŷ
1/4" Socket & Wrench
Ŷ
Ŷ
Vent hood
Ŷ
Ŷ
Duct tape or
duct clamp
This dryer MUST be vented to the outdoors.
Use only 4” rigid metal ducting for the home exhaust
duct.
DO NOT
use any plastic to vent the dryer, this
includes the home exhaust duct, dryer transition
duct, or within the dryer.
DO NOT
use flexible metal or metal foil ducting for a
home exhaust duct or within the dryer.
DO NOT
exhaust into a chimney, kitchen exhaust,
gas vent, wall, ceiling, attic, crawl space, or
concealed space of a building.
DO NOT
install a screen in or over the exhaust duct.
DO NOT
install a booster fan in the exhaust duct.
Failure to follow these instructions can result in
death or fire.
- Fire Hazard
WARNING
Ŷ
Ŷ
Exhaust duct
(15-1/2" Long)
Ŷ
Ŷ
Elbow duct
Ŷ
Ŷ
Exhaust duct
(12-1/2" Long)
Ŷ
Ŷ
Exhaust duct
(9-1/2" Long)
Ŷ
Ŷ
Access panel
Ŷ
Ŷ
Bracket with
adhesive
CONTENTS