User Manual of EM730/EM730E Series Inverter
53
code F11.01, and so on to F11.31, 32 in total. Function code modification in the Level 3 menu is
equivalent to that in the full menu mode, and the modification method is also the same.
In the Level 2 menu of the user-defined mode, turn the potentiometer key
on the
keyboard, to change the function code defined by F11.00 to that defined by F11.31.
When the right shift key
is pressed in the Level 2 menu, the cursor will not shift.
Press the ENTER key
to enter the Level 3 menu. If the displayed function code is
modifiable currently, the lowest bit indicated by the cursor will flicker. Parameter modification
is the same as that in the Level 3 menu under the full menu mode. After modification, press the
ENTER key ENTER to confirm and save the parameters and enable next user-defined parameter.
Function code modifications in the Level 3 menus under different menu modes have equivalent
effects.
4.2.3
Non-default mode (
--
C
--
)
In the non-default mode, press the ENTER key to enter the Level 2 menu. The first
parameter different from the default settings of the inverter will be displayed, starting from
F00.00. When the right shift key
is pressed in the Level 2 menu, the cursor will not shift.
If the increment or decrement key on the keyboard is pressed, the function group and function
code will not be modified, and the non-default function code following and in front of the
current function code will be displayed respectively. If the displayed function code is modifiable
currently in the Level 3 menu, the lowest bit indicated by the cursor will flicker. In this case,
parameters can be modified in the Level 3 menu under the full menu mode. After modification,
press the ENTER key
to confirm and save the parameters and enable next non-default
parameter.
For example, change F00.03 to 1 and F00.07 to 40.00 in the full menu mode, which are not
default values. Then enable the non-default mode. F00.03 will be displayed first. When the
potentiometer key
on the keyboard is turned clockwise, F00.07 will be displayed; and
when the potentiometer key
on the keyboard is turned counterclockwise, F00.03 will be
returned, as shown below:
