User Manual of EM730/EM730E Series Inverter
47
should be 0.5N.m.
3.4
Extension wiring of keyboard
1)
The external keyboard needs to be ordered separately.
2)
The external keyboard is connected to the RJ45 port via an ordinary network cable (plug:
meeting the EIA/TIA568B standards) prepared by the customer.
3)
Connect the RJ45 port of the keyboard to that of the control panel via a network cable. The
keyboard extension cable should be no longer than 3m. Then extension cable may be
10m long in the presence of Cat5E wires and good electromagnetic environments.
3.5
Connection test
After wiring, check the following items.
Check whether wiring is incorrect.
Check whether there are screws, terminals and wire scraps inside the inverter.
Check whether the screws are loose.
Check whether the exposed wire at the stripped end of the terminal is in contact with
other terminals.
