User Manual of EM730/EM730E Series Inverter
182
t1
t2
t3
t4
Output
frequency
Linear
acceleration
and
deceleration
S-curve
acceleration
and
deceleration
Acceleration time
Deceleration time
Fig. 7-16 Acceleration/Deceleration Time Control Diagram
Function
code
Function code name
Parameter description
Unit
Default
setting
Attribute
F04.19
Stop mode
0: slow down to stop
1: Free stop
0
〇
F04.19=0: deceleration to stop
The motor decelerates to stop according to the set deceleration time [default setting: based
on F00.15 (deceleration time 1)].
F04.19=1: free stop
When the stop command is valid, the inverter will stop output immediately, and the motor
will freely coast to stop. The stop time depends on the inertia of the motor and load.
