Siemens SITRANS FUH1010PVDX, Operating Instructions Manual, Page: 187 / 308

6-3
CQO:1010PVXFM-3
Section 6
6.2 FLOW DATA MENU
This menu provides a “live” display of all flow-related output data.
Flow GAL/MIN -2.26
Flow Vel F/S
Total KGAL
0.0000
Vs m/s 1273.21
Signal mV 44
Valc % 57
Vaer % 0
Alarm Status ---R-----
AnCal GAL/MIN 0.0000
HiFlow GAL/MIN 1576.8
LoFlow GAL/MIN -1576.8
Siemens Dual Path SITE1
Current Flow Rate and Units
Flow Data
NOTE: Menu shows English units (i.e., gallons).
Flow This is a real-time (updated) flow rate display in current rate units
(e.g., GAL/MIN).
Flow Vel F/S Linear flow velocity in f/s and m/s depending on preferred units.
Total This is a real-time (updated) flow total display in current total units
(e.g., KGAL).
Vs m/s Current liquid sonic velocity (Vs) in m/s. The Vs value depends on the liquid
and its temperature. This menu cell allows “fine-tuning” when highlighted.
Press the [+] or [1] key to increase, or the [-] or [2] key to decrease the
reading.
CAUTION: Incorrect usage will result in reduced accuracy.
Signal (mV) Xdcr signal strength (in mV). This is the amplitude of the transit-time
receive signals. Improper coupling, attenuative liquid or pipe could cause a
low value.
Valc % Input Amplifier gain indication. Larger % indicates a stronger liquid signal.
Vaer % This shows the current percent of aeration detected by the meter.
Alarm Status This letter code field shows the status of the meter’s built-in alarms. A dash
indicates an inactive alarm. Letter codes reflect the following alarm condi-
tions:
S = Transducer Spacing Warning
E = Empty Alarm
R = Flow Rate Alarm (High or Low rate threshold exceeded)
F = Fault Alarm
A = Aeration Alarm
M = Memory Activated (Fault Suppressed)
K = Makeup Flag (May be Latched)
I = Interface Alarm
P = Pig Alarm (option)
FLOW DATA MENU ITEMS
(continued)