Siemens SITRANS FUH1010PVDX, Operating Instructions Manual, Page: 125 / 308

5-23
CQO:1010PVXFM-3 Section 5
5.4.1 HOW TO SELECT A TRANSDUCER MODEL
Use the [Transducer Model] menu cell to define the type of transducer for use with your application. This
allows the flow display computer to adjust its transmit/receive functions accordingly. You can choose
from either the [1011 Universal] or [1011H High Precision] transducer lists, or from a list of [991 Univer-
sal] models. You should consider using high precision transducers for extremely critical applications. We
usually recommend these transducers for custody transfer, leak detection or nuclear power applications.
The system default is [1011 Universal]. If this suits the application, bypass this menu cell by pressing the
<Down Arrow>.
NOTE: Menu cell [Install Path] appears when the Dual Path Flow meter is selected from the
[Select Meter Type] menu. The Path [1] or Path [2] menu cell can be selected by pressing
the <Right Arrow>. Virtual Channel 3 [Ch 1+2 Flow] and Ch 1-2 Flow] menu cells do not
allow selection of a transducer type.
PICK/INSTALL XDCR MENU STRUCTURE
Pick/Install Xdcr Transducer Model 991 Universal
1011 Universal
1011 Hi Precision
Transducer Size
A1 A1 0A 0A A1H A1H
A2 0 A2H
B1 1 A3H
B2 2 B1H
B3 2A B2H
C1 3 C1H
C2 3A C2H
C3 4 C3H
D1 4A D1H
D2 5 D2H
D3 5A D3H
E1 D4H
E2
E3
Xdcr Mount Mode Direct
Reflect
Spacing Offset Minimum
Nominal
Maximum
Number Index 4 (generated)
Spacing Method Spacer Bar [P/N] * auto P/N generation
Ltn 2.00 (generated)
Install Complete? No [Yes] *[Yes] indicates successful install
Install
Empty Pipe Set MTYmatic
Set Empty
Actual MTY
Zero Flow Adjust AutoZero *Reflect mount only
ZeroClr
Reversamatic
Actual Zero
ZeroMatic
1011 Universal 991 Universal 1011H High Precision