Siemens SITRANS FUH1010PVDX, Operating Instructions Manual, Page: 182 / 308

5-80
CQO:1010PVXFM-3 Section 5
To assign a Network ID number
To enable numeric entry press .
Use PC numeric keys or Magnetic Wand to enter the [Network ID] number.
To store Network ID press . This moves the cursor to [RTS Key Time].
RTS Key Time
During a serial transmission session, you can select how long the flow computer holds its request-to-
send line high until it receives a clear-to-send signal. If the RTS key time expires, the FUH1010PVX will
return its RTS line low and abort the transmission attempt. Data entry units are seconds. The default [RTS
Key Time] is 0.2 seconds.
NOTE: The [RTS Key Time] function is only provided when the meter’s Network ID number is
non-zero.
To set the RTS Key Time:
To access the [RTS Key Time] option list press
To move the asterisk to the required RTS time press
To store the data press
5.10.10 SYSTEM INFO
This menu provides general information about the flowmeter.
ENT
ENT
5.10.11 DATA DISPLAY SCREEN
The alphanumeric display provides visual access to all system variables and conditions. During installa-
tion the 2 x 16 character alphanumeric display is only used to access the numerous menus offered by
the FUH1010PVX system. Once a measurement channel is activated and begins operation it can display
a wide variety of meter data.
Activating The Display
To activate the Display Screen, simply connect power to the FUH1010PVX system. On power-up the
FUH1010PVX will display one of the following:
Version This is the meter’s operating system version number. The Technical Services
Group may request this number during consultations.
Reset Date/Time Shows the date and time of this meter’s last <F4> reset.
Op System P/N Meter’s operating system part number.
Checksum Operating System verifying code. The Technical Services Group may request this number
during consultations.
Code Software Compile Date/Time. Operating System identifier. The Technical Services Group
may request this number during consultations.
System Time Use to set system time and date. Format: xx.xx.xx xx.xx.xx
System Info Menu Structure