Siemens SITRANS FUH1010PVDX, Operating Instructions Manual, Page: 141 / 308

5-39
CQO:1010PVXFM-3 Section 5
5.6THE FLOW/TOTAL UNITS MENU
The Flow/Total Units menu is available after selecting a meter type and measurement channel. Use the
Flow/Total Units menu to select energy and volumetric flow units and an associated time base for the
energy and flow rate and total outputs. After making your selections, a view-only menu cell shows the
resultant scaling. Another menu cell lets you adjust the output resolution by selecting a display range.
This system provides three totalizer display modes:
POSFLOW ............................. Positive (forward) energy/flow total only
NEGFLOW ............................ Negative (reverse) energy/flow total only
NETFLOW ............................. The net of the Positive and Negative energy/flow (default)
Flow Volume Units Gallons <US>
Flow Time Units MIN
Flow Disp Range Autorange
Flow Disp Scale GAL/MIN
Total Vol Units Gallons <US>
Totalizer Scale KGAL
Total Resolution 00000x00
Totalizer Mode NETFLOW
Batch/Sample Total 0.000
Reset Totalizer No
Siemens Dual Path FLOW1
Choose desired Flow rate volume units
Flow/Total Units
Use this menu cell to enter a
volume accumulation for the
batching or sampling totalizer
relay trigger.
Use these menu cells
to set the scaling for the
flow rate and flow total
outputs.
Use this menu cell to
select how the totalizer
accumulates flow.
Use this menu cell to set the
resolution of the totalizer
.
Use this menu cell to select
either volumetric or mass flow
total units
.
Use this menu cell to select a
range for the flow rate display
screen
.
Use this menu cell to select a
time base for the flow rate
units.
Use this menu cell to select
either volumetric or mass flow
rate units
.