Siemens SITRANS FUH1010PVDX, Operating Instructions Manual, Page: 171 / 308

5-69
CQO:1010PVXFM-3 Section 5
Delete Pipe
This menu allows you to remove any of the pre-loaded pipes within a class from a pipe table. We
recommend that you use this function only to delete pipes that you have added so as to preserve
the factory presets.
To delete a pipe from the Pipe Table
To access the [Delete Pipe} menu press . To access the [Choose Pipe Class]
option list press .
Press scroll the option list to the class that contains the pipe to be deleted.
To select the pipe class press . This moves the highlight to [Choose Pipe Name].
To access the [Choose Pipe Name] option list press .
Press to scroll the option list to the pipe to be deleted.
To remove it from the pipe table press .
5.10.3 TRANSDUCER TYPE MENU
During the Transducer Install procedure, FUH1010PVX analyzes the entered pipe and liquid data, then
automatically generates a list of the transducer sizes most suited for the application. The Transducer
Type menu allows you to place “marks” (asterisks) next to any transducers that you may want the meter
to consider preferentially during its recommendation routine. These transducers will be included on the
recommended list, that appears on the reverse-video prompt line at the top of the display screen. The
left-most transducer on the list is the most applicable while the right-most transducer on the list is the
least applicable. See the Transducer Type menu structure on the next page.
To mark Transducers:
To access the [Transducer Type] menu cell press
Press to scroll the highlight to a transducer type (e.g., 1011H High Precision) then
press to access the size option list.
Scroll through the option list by pressing and press to “mark” desired transduc-
ers. Note that a plus sign (+) appears before each “marked” transducer.
If you want to clear a “marked” transducer, move the highlight to the transducer then press the
key. Note that this removes the plus sign.
To leave an option list press
ENT
ENT
ENT
CLR