Siemens SITRANS FUH1010PVDX, Operating Instructions Manual, Page: 137 / 308

5-35
CQO:1010PVXFM-3 Section 5
Select the [ZeroMatic] menu cell by pressing
Press to enable ZeroMatic.
Siemens Dual Path SITE1
Transducer Model 1011 Universal
Transducer Size B3
Xdcr Mount Mode Reflect
Spacing Offset Minimum Flow
Number Index 7
Spacing Method Track 1012TP
Ltn Value (in) 0.778
Install Complete? ZeroMatic
Empty Pipe Set Auto Zero
Zero Flow Adjust ZeroMatic
Zeroclr
ZeroMatic Active [6:.................:0]
Pick/Install Xdcr
When the initial makeup of ZeroMatic is complete the screen will return to the Pick/Install Xdcr menu and
automatically highlight [Operation Adjust], which is the next menu cell.
Channel/Path Setup
Pipe Data
Application Data
Pick/Install Xdcr
Operation Adjust
Flow/Total Units
Data Span/Set/Cal
Stripchart Setup
Datalogger Setup
I/O Data Control
Diagnostic Data
Siemens Dual Path SITE 1
Dual Path Flow
Conforms operation to user Preferences
To disable the ZeroMatic function:
Select the [Pick/Install Xdcr] menu cell from the Dual Path Flow menu.
Scroll down to the [Zero Flow Adjust] menu cell by pressing
NOTE: The highlighted [ZeroMatic] menu item is the only indication that ZeroMatic is function-
ing.
Invoke the ZeroMatic initial makeup procedure as previously described above.
While ZeroMatic initial makeup is running, press to abort the process thereby disabling the
function.
The screen will return to the Dual Path Flow menu and highlight the [Operation Adjust] menu cell.
ENT