Siemens Sirius 3RA6 System Manual Download Page 70

Page: 70 / 320

3RA61/3RA62 compact starter

5.4 Installing/removal

SIRIUS 3RA6 compact starter

System Manual, 09/2014, NEB560060102000/RS-AA/006

Procedure

For servicing purposes, the compact starter can be removed from the infeed system while

the system is live but at zero current.

Note
The fact that the SIRIUS infeed system for 3RA6 features permanent wiring means that

there is no need to disconnect the main circuit terminals.

Step

Instructions

Image

Insert a screwdriver into the opening.

Tilt the screwdriver to the right and then

down (see arrow on enclosure lid) so

that you can push the compact starter

forwards by approx. 5 mm.

Move the compact starter forwards to

remove it from the screw-type infeed or

extension block.

Note
The 45 mm adapter for the infeed system for 3RA6 can be removed in the same way.

Summary of Contents for Sirius 3RA6

































































































































































































































































































































Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands

Siemens Sirius 3RA6, System Manual

Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands