Siemens Sirius 3RA6 System Manual Download Page 37

Page: 37 / 320

Application planning

4.3 Supply options (main circuit)

SIRIUS 3RA6 compact starter
System Manual, 09/2014, NEB560060102000/RS-AA/006

4.3.3

8US busbar adapter

The compact starters are mounted on the 8US busbar adapter and connected on the line

side. This ready-to-use unit plugs directly onto the busbar systems, thereby taking care of

mechanical fastening and electrical connection at the same time.

Installation with 8US busbar adapter

Figure 4-4

Infeed via 8US busbar adapter

Note
The 8US busbar adapter plus compact starters must be arranged side by side on the busbar

system without any space in between in order to meet the specified vibratory load and shock

load requirements.
You can find more information on the technical data in "8US busbar adapter (Page 265)".

Summary of Contents for Sirius 3RA6

































































































































































































































































































































Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands

Siemens Sirius 3RA6, System Manual

Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands