Siemens Sirius 3RA6 System Manual Download Page 15

Page: 15 / 320

SIRIUS 3RA6 compact starter
System Manual, 09/2014, NEB560060102000/RS-AA/006

Product-specific information

2.1

Standards/Regulations/Approvals

Standards

The compact starter complies with the following standards:

●

IEC / EN 60947-6-2

●

UL 508 Type E

●

CSA C22.2 No. 14 Type E

Approvals/Test reports

The compact starter has UL and CSA approvals. These are indicated on the rating plate by
the symbols

and .

In addition, the compact starter has obtained the following shipbuilding approvals: GL, LRS,

DNV, BV, ABS.
Confirmation of approvals, test certificates and characteristic curves is available via the

Internet (

www.siemens.com/industrial-controls/technical-assistance

Compact starter degree of protection

The compact starter's degree of protection is IP20. In the terminal area it features

IP00 degree of protection.

Infeed system for 3RA6 degree of protection

The infeed system for the 3RA6 features IP20 degree of protection. In the terminal area it

features IP00 degree of protection.

Isolating features

The requirements of IEC / EN 60947-6-2 have been met in respect of the isolating features.

2.2

Use as prescribed

Prescribed use in accordance with IEC / EN 60947-6-2.

Summary of Contents for Sirius 3RA6

































































































































































































































































































































Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands

Siemens Sirius 3RA6, System Manual

Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands