Siemens Sirius 3RA6 System Manual Download Page 100

Page: 100 / 320

3RA64/3RA65 compact starter with IO-Link

6.3 Configuring

SIRIUS 3RA6 compact starter

100

System Manual, 09/2014, NEB560060102000/RS-AA/006

Configuring the IO device with the Port Configurator Tool

In the Configuration table, select the IO-Link master (e.g. the 4SI SIRIUS electronics

module).

Right-click and select "Launch IO-Link Configurator" in the shortcut menu.

Result:

S7-PCT

is started.

Select the compact starter in the hardware catalog of the S7-PCT.

Start by parameterizing the compact starter (IO device).

Additional information is available in the

S7-PCT

online help.

6.3.2.3

Configuration with STEP 7 and S7-PCT (GSD version)

Configuring the IO-Link master in

HW Config

with GSD

Start the SIMATIC Manager and configure the project as described in the

STEP 7

online

help.

In the hardware catalog of

HW Config

, select the IO-Link master (e.g. in the ET 200S or

ET 200eco distributed IO system).

Drag-and-drop the IO-Link master from the hardware catalog to the configuration table.

Parameterize the IO-Link master.

Configuring the IO device with the Port Configurator Tool

In the Configuration table, select the IO-Link master (e.g. the 4SI SIRIUS electronics

module).

Right-click and select "Start Device Tool" in the shortcut menu. Click on "S7-PCT" in the

submenu.
Result:

S7-PCT

will be started.

Select the compact starter in the hardware catalog of the S7-PCT.

Start by parameterizing the compact starter (IO device).

Additional information is available in the

S7-PCT

online help.

Summary of Contents for Sirius 3RA6

































































































































































































































































































































Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands

Siemens Sirius 3RA6, System Manual

Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands