Siemens Sirius 3RA6 System Manual Download Page 105

Page: 105 / 320

3RA64/3RA65 compact starter with IO-Link

6.4 Parameters

SIRIUS 3RA6 compact starter
System Manual, 09/2014, NEB560060102000/RS-AA/006

105

6.4.1

"Starter available" parameter

The "Starter available" parameter enables removal of individual starters from the

configuration. This is useful above all when existing configurations are re-used but individual

modules are not implemented.
The table below shows the parameter values.

Table 6- 1

"Starter available" parameter

Value Description

Default setting

Starter not available

—

Starter available

yes

4 starters are configured in the compact starter as delivered from the factory. If fewer

starters are required, this must be configured.
Please not that the "Starter available" parameter affects the PRESET-ACTUAL comparison.

If you parameterize 3 or fewer starters in a starter group, the PRESET-ACTUAL comparison

automatically becomes active.

Practical implementation

Use the following connecting cable to bridge gaps in the configuration arising from a missing

3RA64/3RA65 compact starter with IO-Link:

●

14-core, 200 mm (3RA6933-0A)

●

10-core, 200 mm (3RA6933-0B)

Note
10-core connecting cable!
If you use the 10-core connecting cable, you must re-supply the auxiliary voltage V

Aux

after the empty location.
You can find more information on the connecting cables in " Connecting cable for IO-Link

(Page 231)".

Summary of Contents for Sirius 3RA6

































































































































































































































































































































Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands

Siemens Sirius 3RA6, System Manual

Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands