Siemens Sirius 3RA6 System Manual Download Page 54

Page: 54 / 320

3RA61/3RA62 compact starter

5.3 Functions

SIRIUS 3RA6 compact starter

System Manual, 09/2014, NEB560060102000/RS-AA/006

Actuator READY

The circuit breaker mechanism (breaker latching mechanism) in the compact starter is

switched on and the compact starter is ready.
When the actuator is in the READY position, the 3RA61 compact starter (direct starter)

can adopt the following statuses:

Table 5- 3

Actuator display elements READY (3RA61 compact starter)

Actuator

LEDs

Compact starter status

A1/A2

ON I

READY

OFF

Compact starter is ready:

•

The circuit breaker mechanism is switched on.

•

Control supply voltage not present.

•

The main contacts are open.

READY

GREEN

Compact starter is switched on:

•

The circuit breaker mechanism is switched on.

•

Control supply voltage is present.

•

The main contacts are closed.

READY

GREEN

OFF

There is a fault.

•

"Overload trip" display white: Overload tripped.

•

"Overload trip" display not white: Control supply

voltage is outside the working range.

•

The main contacts are open.

Summary of Contents for Sirius 3RA6

































































































































































































































































































































Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands

Siemens Sirius 3RA6, System Manual

Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands