Siemens Sirius 3RA6 System Manual Download Page 175

Page: 175 / 320

Accessories

7.7 Infeed system for 3RA6

SIRIUS 3RA6 compact starter
System Manual, 09/2014, NEB560060102000/RS-AA/006

175

7.7.3.4

Uninstalling the accessories for the infeed system for 3RA6

Requirements

DANGER

Hazardous voltage!
Will cause death or serious injury.
Before starting work, disconnect the system and the device from the power supply.

●

The compact starters and circuit breakers must have been removed from the infeed

system for 3RA6. For additional information on this topic, please refer to "Removing the

compact starter from an infeed system for 3RA6 (Page 69)".

●

Flat-head screwdriver with max. blade width of 3 mm and total max. length of 120 mm for

levering out the link wedges and releasing the PE tap and PE extension connectors.

Removing PE accessories

The PE infeed is mounted on the right or left of the base carrier.

Step

Instructions

Image

Use a screwdriver to lever out the link

wedge.

Push the PE infeed downwards.

Pull the PE extension connector down

and out and then remove the PE infeed

sideways.

Press the clip on the PE tap backwards

and then pull the PE tap down and out

of the infeed or extension module.

Summary of Contents for Sirius 3RA6

































































































































































































































































































































Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands

Siemens Sirius 3RA6, System Manual

Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands