Siemens Sirius 3RA6 System Manual Download Page 66

Page: 66 / 320

3RA61/3RA62 compact starter

5.4 Installing/removal

SIRIUS 3RA6 compact starter

System Manual, 09/2014, NEB560060102000/RS-AA/006

5.4.1.3

Installing the compact starter on an infeed system for 3RA6

Requirements

●

The SIRIUS infeed system for 3RA6 must be correctly installed. For additional information

on installing the infeed system, please refer to "Infeed system for 3RA6 (Page 156)".

●

The compact starter must be switched off (actuator set to OFF position).

NOTICE
Compact starter and infeed system material damage!
You can damage the compact starter and the infeed system if you insert the compact

starter into the infeed system for 3RA6 while the starter is switched on (actuator in the

READY position).
Make sure that the compact starter's actuator is set to the OFF position before you

insert the compact starter into the infeed system for 3RA6.

Procedure

Step

Instructions

Image

Ensure that the actuator is in the

OFF position.

Attach the compact starter to the

front of the infeed system for

3RA6.

Push the compact starter straight

onto the infeed system for 3RA6

until you hear it engage.

Release the actuator.

Summary of Contents for Sirius 3RA6

































































































































































































































































































































Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands

Siemens Sirius 3RA6, System Manual

Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands