Siemens Sirius 3RA6 System Manual Download Page 168

Page: 168 / 320

Accessories

7.7 Infeed system for 3RA6

SIRIUS 3RA6 compact starter

168

System Manual, 09/2014, NEB560060102000/RS-AA/006

7.7.3.3

Installing the accessories for the infeed system for 3RA6

Installing PE accessories

The PE infeeds and taps are available with screw-type or spring-loaded connection

technology. The PE infeed can be mounted to the right or left of the screw-type infeeds and

extension modules. The PE tap is inserted into the relevant slots from the bottom. The

modules offer the following slot options:

●

Screw-type infeed (25/35 mm

), screw-type infeed (50/70 mm

), 3-slot extension module:

4 slots

●

2-slot extension module: 2 slots

The figure below provides an overview of the mounting options available for the PE infeed

and PE tap.

①

PE infeed, 25/35 mm

, with screw-type or spring-loaded connection technology

②

PE tap, 6/10 mm

, with screw-type or spring-loaded connection technology

③

PE extension connector

Figure 7-5

Mounting options for PE infeed and PE tap

Summary of Contents for Sirius 3RA6

































































































































































































































































































































Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands

Siemens Sirius 3RA6, System Manual

Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands