Siemens Sirius 3RA6 System Manual Download Page 68

Page: 68 / 320

3RA61/3RA62 compact starter

5.4 Installing/removal

SIRIUS 3RA6 compact starter

System Manual, 09/2014, NEB560060102000/RS-AA/006

5.4.2.2

Removing the compact starter from a level surface (screw fastening)

Requirements

●

The compact starter must be switched off (actuator set to OFF position).

●

The control current terminals must have been disconnected.

DANGER

Hazardous voltage!
Will cause death or serious injury.
Removing the compact starter while the system is live can damage the compact starter

and can also result in an electric shock.
Before starting work, disconnect the system and the device from the power supply.

Procedure

Note
The compact starter can be removed from the wall with the wiring still in place (permanent

wiring), i.e. there is no need to disconnect the main circuit terminals.

Summary of Contents for Sirius 3RA6

































































































































































































































































































































Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands

Siemens Sirius 3RA6, System Manual

Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands