Siemens Sirius 3RA6 System Manual Download Page 197

Page: 197 / 320

Accessories

7.9 8US busbar adapter

SIRIUS 3RA6 compact starter
System Manual, 09/2014, NEB560060102000/RS-AA/006

197

7.9.3.2

Removal

Requirements

●

The compact starter must be switched off (actuator set to OFF position).

●

The busbars must be disconnected from the power supply when the 8US busbar adapter

is removed from the busbars.

Procedure

Note
The compact starter can be detached from the 8US busbar adapter either before or after the

8US busbar adapter has been removed from the busbars.

Step

Instructions

Image

From the front, insert a screwdriver into

the right-hand opening on the busbar

adapter and lock the holder (A). The

button on the top side of the busbar

adapter should spring up.

Remove the busbar adapter from the

busbars. To do this, you will first need to

push it up slightly so that you can

remove it by pulling it off towards you.

Note
Removing the busbar adapter plus mounted device holder
When removing the busbar adapter along with a mounted device holder, you will need to

release both holder (A) on the busbar adapter and the one on the device holder.

Summary of Contents for Sirius 3RA6

































































































































































































































































































































Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands

Siemens Sirius 3RA6, System Manual

Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands