Siemens Sirius 3RA6 System Manual Download Page 222

Page: 222 / 320

Accessories

7.12 AS-i mounting module for 3RA61/3RA62 compact starter

SIRIUS 3RA6 compact starter

222

System Manual, 09/2014, NEB560060102000/RS-AA/006

Procedure

The AS-i mounting module is addressed via an addressing socket, e.g. using the

AS-Interface addressing unit. The connecting cable is used to connect this unit to the

addressing socket.

Step

Instructions

Figure

Disconnect the AS-i voltage.

Connect the AS-Interface addressing

unit to the addressing socket.

Set the required address.

For more detailed information on the AS-Interface and on addressing of AS-i slaves, please

refer to the operating instructions "AS-Interface addressing unit V3.0"

(3ZX1012-0RK10-4BA1).

Note
The module address can be changed as often as required.

Summary of Contents for Sirius 3RA6

































































































































































































































































































































Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands

Siemens Sirius 3RA6, System Manual

Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands